Using a monopod can elevate photography to new heights

    Sometimes, the difference between a good photograph and a great photograph is a matter of perspective.

    Just getting a higher view can provide a better perspective at times. But sometimes getting that angle is more easily said than done. There may not be a place where you can climb up, or bringing in a ladder would be impractical.

    Drones offer one way to get your camera above the crowd, but they can be expensive, sometimes require licensing to use and in some places are illegal.

    But there is a way that you can get at least some altitude with your camera even in places where you can't legally deploy a drone.

    In a 2013 video, Joe Edelman suggests using a monopod to elevate your camera to get a better perspective. He suggests putting the camera on the monopod, activate the self-timer and then hoist it up and wait until the shutter trips.

    There are a few caveats. You have to use a wide-angle lens and a small aperture in order to get the greatest depth of field. And, unless you're working with someone who can monitor the camera through wired or wireless tethering, it might take a few tries to get the shot right.

    I decided to give it a try with a veterans memorial in Sunnyside, Wash. The memorial consists of tablets on a block-long plaza. As you can see from a straight-on shot, it doesn't look too interesting.

    But raising the camera more than 10 feet creates a better perspective. 

    While Edelman suggests tipping the monopod forward to get an angle, I have a tilt-pan head on mine, so I could adjust the angle before raising it.

    In the video, Edelman suggests using a painter's pole if you want to get more elevation. Frankly, I wouldn't put a really good camera up on one, for fear of an accident, or make sure it was the best pole ever made.   

Knoptop and my wife's crafting save my monopod

    Thanks to a tip from Knoptop, and my wife's interest in craft projects, I didn't have to get a new monopod.

    On a trip to Seattle last year, the top came off the quick-release plate of my monopod. I have yet to figure out how it happened, but the top padding was gone from the plate, the tripod screw was falling out and the camera wasn't sitting as secure as before.

    I jerry-rigged it using tape, but it wasn't a perfect situation. At that point, I thought I had two options: Try to find a new quick-release plate (next to impossible) or buy a new monopod.

    But while watching Knoptop's video on his PVC shoulder rig I found a solution. He recommended using craft foam to better seat the camera in the mount.

    I asked my wife if she had any foam in her craft materials, and she did. So, with a pair of scissors, an Xacto knife and a hot-glue gun, I was able to make a new pad that has worked just as well as the original.

    And if there's another mishap, the repair will be quick and cost a fraction of a new monopod.